The non standard engineering lamps and lanterns are relative to the construction engineering. It is the lamps used in the building engineering, including indoor and outdoor, and according to the different buildings, it can be divided into non standard engineering lamps and lanterns of the hotel, the non standard engineering lamps and lanterns of KTV club, and the non standard engineering lamps and other sales offices in marketing.

At present, the products of the non standard engineering luminaire Market are mixed up. What's the quality of the product? What about the installed effect map? Will the products leak out? What's the price of non - standard engineering lights in the hotel? And so on, we have been puzzled for a long time. Today, Xiaobian tells you what you need to pay attention to when choosing non-standard lamps for hotels.

When buying a hotel European lamp, the consumer is most concerned about the quality of the lamps and lanterns. After all, after the purchase of the lamps and lanterns, the key problem that can determine whether the lamps can be used for a long time is the quality of the lamps. Therefore, when purchasing lamps, consumers should check the quality of lamps and identify the quality of lamps and lanterns.

1, we should pay attention to the mark on the non - standard project lights of the hotel.

According to the information in the instructions to distinguish the quality of the lamps and lanterns, we can see the name of the lamps and lanterns, the model of the lamps and lanterns, the trademark, the rated voltage and so on. These information are very important.

2, it can be identified from anti shock protection.

When the hotel is not the standard engineering lamp, the body can not touch any kind of charged material after the installation of the light bulb, so that the health of the human body can be guaranteed. There is an electric shock proof device on the non standard engineering lamp of the hotel. The human body is absolutely safe only when the electric shock protection device is fully in line with the demand for use.

3. Judge the quality of the luminaire from the cross sectional area of the non standard project light.

When buying, you can see whether there is a mark on the insulating layer of the conductor on the luminaire. When the conductor cross section of the hotel's non standard engineering lamp is at least 0.5mm/ square, it is the most suitable.

4, time, durability

Usually, a star hotel will make a small innovative repair in about five years, and make a large-scale innovative repair in about ten years. In other words, the minimum number of lamps should be ten years or more, so that they can satisfy the needs of star rated hotels.

Because the usual minor repairs will not replace the lamps and lanterns, the scale of human resources involved is too large. This means that in the selection of lamps and lanterns, the most hot and compression of the local, including the reflective cup cover, heat dissipation components, fixed (positioning) components of the quality is very important.

5, flexibility

Usually, the number of light sources selected by star hotels is between 2000 and 4000 hours. So in the past 10 years, lamps and lanterns need to replace many light sources. The number of lamps in star hotels is over 10000, so replacing the light source is a huge human resource. Therefore, the flexibility of lamps is another important consideration. The most ideal lamp selection is to load and unload the light source without touching the fixed (positioning) components of the lamp. In addition to saving the replacement time, it also provides a very positive maintenance for interior decoration.

6, detail exterior

As mentioned earlier, the star rated hotel can embody individuality and magnanimity. It is the success depicted indoors, but the details of the exterior of the luminaire are also important. This includes the various aspects of the luminaire itself, for example: to take the usual smallpox down lights for example, the quality of the trim, such as the metal, the surface quality, the degree of lubrication of the reflective cup, (for example, the grinding glass, the uniformity of the sand spray), when the fixtures are in the smallpox, and the ceiling surface (plasterboard / wood) We should pay attention to the details of the joint tightness (whether there is light leakage) and so on. On the other hand, in addition to the hardware (luminaires), the equipment workers (Technology) are also important, and the decoration aspects should be properly guaranteed with the correct device.